Grab-on Raised Rail Slimline II Kit 1255x1358mm - Front Runner

This roof rack kit is designed for pickup hard-tops, motorhome shells, and trailers with an approximate roof dimension of 1475mm/58.1'' (W) x 1560mm/61.4'' (L). The Slimline II platform installs on six (6) supplied feet that slide into the original hard-top rails of your pickup, motorhome shell, or trailer.

NOTE: Additional fasteners may be required to mount the original rails. All Front Runner roof racks come with an installation guide and all components needed to install the Slimline II platform on your vehicle. For Front Runner feet and supplied hardware to work with your hard-top original rail, the rail must have: Groove base width: 20mm minimum / 25mm maximum Groove base height: 6.5mm minimum / 10mm maximum Groove opening width: 8.5mm minimum / 10.5mm maximum Groove opening height: 2mm minimum / 5mm maximum.

Note: A maximum driving speed of 130km/80mph must be observed when the vehicle is equipped with a Front Runner roof rack or load bar kit.