Slimline II Hard Top Pickup Roof Rack 1475x1762mm FRONT RUNNER

This roof rack kit is designed for pickup hard tops, camper shells and trailers with approximate roof dimensions of 1475 mm/58.1" (W) x 1762 mm/69.4" (L). The Slimline II tray installs on the six (6) supplied feet that slide into the original rails of your pickup hard top, camper shell or trailer. This 'high' kit has space to place a Front Runner camping table or other accessories below the rack.

NOTE: Additional fasteners may be required to mount the original rails. All Front Runner racks come with an installation guide and the components necessary to install the Slimline II tray on your vehicle. For Front Runner feet and supplied hardware to work with your hardtop original rail, the rail must have: Groove base width: 20 mm minimum / 25 mm maximum, Groove base height: min. 6.5 mm / max. 10 mm, Groove opening width: min. 8.5 mm / max. 10.5 mm, Groove opening height: 2 mm minimum / 5 mm maximum.
*Please consult the hardtop manufacturer for the rated load of your hardtop and rail.

Note: A maximum driving speed of 130 km/80 mph per hour must be observed when the vehicle is equipped with a Front Runner roof bar or load bar kit.