Slimline II Front Runner Roof Rack 1475x1560mm for Hard Top Pick-Up

This roof rack kit is designed for pick-up hard tops/camper cells and trailers with an approximate roof dimension of 1475mm/58.1'' (W) x 1560mm/61.4'' (L). The Slimline II platform installs on the six (6) supplied feet that slide into the original rails of your pick-up hard top/camper cell or trailer.

NOTE: Additional fasteners may be required to mount the original rails. All Front Runner roof racks come with an installation guide, as well as the components necessary to install the Slimline II platform on your vehicle. For Front Runner feet and supplied hardware to work with your original hardtop rail, the rail must have: Groove base width: 20 mm minimum / 25 mm maximum, Groove base height: min. 6.5 mm / max. 10 mm, Groove opening width: min. 8.5 mm / max. 10.5 mm, Groove opening height: 2 mm minimum / 5 mm maximum.

Note: A maximum driving speed of 130km/80mph must be observed when the vehicle is equipped with a Front Runner roof bar or load bar kit.